Bitmain l3 504MH/s Bitmain Miner with PSU
> Products
Bitmain l3 504MH/s Bitmain Miner with PSU
  • Antminer S9K
  • Bitmain l3 504MH/s Bitmain Miner with PSU
  • Bitmain l3 504MH/s Bitmain Miner with PSU
  • Bitmain l3 504MH/s Bitmain Miner with PSU

Bitmain l3 504MH/s Bitmain Miner with PSU

Payment Terms:


Product Name:

Bitmain l3 504MH/s Bitmain Miner with PSU



Hash Rate:






    Get Best Quote

    Bitmain l3 introduction

    • Heat Dissipation Effectively – The front and rear dual cooling fans of the L3+ miner make the heat dissipation effect very good, and each chip has an independent heat sink, so there is no need to worry about excessive heat causing the miner to fail to operate.
    • The BM1485 ASIC chip – L3+ Crypto mining machine uses the latest generation BM1485 chip which deliver more hashrate and efficiency than any previous miner.
    • With TSMC’s 28-nanometer FinFET process and a fully customized design solution, the L3+ cryptocurrency mining machine is capable of reaching a much higher efficiency rating while also using less power low-energy. The energy consumption ratio of this device is 1.6J/MH.
    • We have debugged the machine before shipment to ensure normal operation. Hash rate fluctuate within 7% is Normal and acceptable. Aslo We have wiped and cleaned the machine, please rest assured to purchase.

    Antminer L3+ is an addition to Bitmain’s Antminer Application Specific Integrated Circuit flagship brand. Bitmain produces it, a giant in the mining industry. Launched in 2013, the Antminer brand has been one of the leading brands in technical specifications and excellence in produced miners quality. The Antminer has over 75% share in the mining industry worldwide.

    Due to the popularity of Litecoin, there was a demand for mining hardware that can mine the coins. Bitmain produced and started shipping the Antminer L3 series from the end of 2016. The L3 series consists of L3+ (504Mh), L3++(580Mh), L3++(596) and L3+(600Mh). All L3 models come with an impressive BM1485 Litecoin ASIC chip.

    The BM1485 is the first Litecoin Application Specific Integrated Circuit(ASIC) useful chip for mining Litecoin. Each Litecoin miner has 288 of such chips in its framework. Litecoin miners are also known as Scrypt miners.

    The L3 miners can mine any coin on the Scrypt algorithm.

    Features of Antminer L3+

    Antminer L3+ (600Mh) has a dual-fan arrangement at the rear and front sides with a suitable aluminum shell case. The arrangement is consistent with the previous model’s design. It weighs about 4.4kg with size dimensions of 188 x 130 x 352mm, making it smaller than most miners with an added advantage of convenient handling and stacking.
    Analysis and Specifications of Antminer L3+(600Mh)

    The fan arrangement is the IP button, network cable socket, and reset button on the front of the miner. The top’s data cables are buckled to prevent wear and tear and for steady data transmission. The Antminer L3+ comes with Bitmain’s 10nm ASIC chip, which, coupled with the hash rate and low power consumption, makes the miner powerful. The miner also comes with an APW3-12-1600-B2 power supply unit, which converts at the rate of 93%.


    Every miner’s algorithm is essential as it decides the top coin and scale of profitability for the device. Since the L3 miners are specifically for mining Litecoin, they work with the Scrypt algorithm. Scrypt is an encryption method that requires lots of time for selection and uses significant memory volumes. It is used in many altcoins as Proof of Work (PoW). Made for Tenebrix and released in 2011, it serves as the basis for Litecoin and Dogecoin, based on the Scrypt algorithm.

    The Scrypt algorithm is for crypto-coin mining, which makes it more complicated for specialized ASIC miners. Coins mined from Scrypt are different from Bitcoin as Bitcoin uses the SHA-256 algorithm.

    Cooling Method

    The Antminer L3+ comes with a high-quality aluminum case that protects it from dust and heat with two fans at the rear and front for cooling. This design is just like the previous models of the L3 series. To achieve effective cooling, Antminer L3+ uses a combination of conduction and convection to cool the device. This cooling process ensures that the miner does not overheat even at maximum capacity, which is an added advantage over terahash miners.

    Inside the miner, it has high-grade aluminum heat sinks on every chip, which raises the heat-absorption capacity. The two fans at the end of the tubes are arranged to dispose of hot air, thereby cooling it immediately. This heat absorption process shows the L3+ can work at maximum power while keeping itself cool.

    Power Consumption

    Notable for its low power consumption, the L3+ is ideal for people who want to mine at home. The L3+ has a power consumption of about 850W, and for users with free electricity, it is an added advantage as it reduces electricity costs. Calculating the electricity cost at 0.1 per KwH, users can enjoy some profit after a day’s work.

    Fan and Air Circulation

    The Antminer L3+ has a 12cm fan of 12V 2.3A at the front side for air intake. The miner also has another 12cm fan at the end for taking out the air and heat. These two fans do an excellent job maintaining a stable mining condition by cooling the device and preventing overheating. During normal mining operations, the fan speed is at 4300 rotations per minute, which is quite useful.

    Noise Level

    Most miners’ noise level is about 60db to 70db, but the Antminer L3+ has a noise level of 75db. The four dedicated fans are working to maintain stable mining conditions and prevent overheating cause the noise level. The standard fan setting adjusts automatically based on the ambient temperature. The Antminer L3+ is suitable for mining at home as the noise level is optimized but is best kept at mining farms.


    The profitability of the Antminer L3+ depends on the electricity rates of the area and the market conditions. Profitability may vary daily, depending on electricity costs; the device will profit when the market favors the top coin.

    Bitmain l3 Specifications

    Brand NameBitmain
    ModelAntminer L3+
    Product Namebitmain l3
    ReleaseJune 2017
    Size352 x 130x 187.5mm
    Chip boards4
    Noise level70db
    Wires9 * 6pins
    Voltage11.6 ~ 13.0V
    Temperature0 – 40 °C
    Humidity5 – 95 %
    Interface Type1024M
    Output Interface TypeASIC Miner
    Network connectionEthernet
    Hash Rate504MH/S
    Warranty180 days

    Product Advantages

    Model Antminer L3+ (504Mh) from Bitmain mining Scrypt algorithm with a maximum hashrate of 504Mh/s for a power consumption of 800W.

    Ydminer  Video

    Go to Youtube View Video>>>

    Packing & Shipping

    1.    Packaging Details: Carton Packing; One Machine Per Carton 
    2.    Delivery Details: UPS, DHL, FedEx, EMS, TNT
    3.    Port: Shenzhen / Hong Kong
    4.    Lead Time: in 3 days after payment
    5.    If your shipment is not received within 30 days after payment, please contact us. We will track the shipment and get back to you as soon as possible.
    6.    The images shown above are not the actual item and are for your reference only.

    Warranty Invalid:
    1. Customer removes/replaces any components by himself without receiving permission from Bitmain first
    2. Damage caused by poor power supply, lightning or voltage surges
    3. Burnt parts on hash boards or chips
    4. Miner/boards/components damage due to water immersion or corrosion due to wet environment
    5. Over Clock
    Please contact with us as soon as possible if you get the thing happened above. We will help you contact the service center to solve the problems as per your request.

    Ydminer Factory Ydminer Office

    Our Company Established in 2016, Ydminer set up its subsidiary - Jingang Zhuoyue Technology Co., Ltd in Shenzhen, China. Ydminer are one of the earliest professional suppliers of miner, power supply, miner fan, etc., and has several years of rich experience in providing mining farm hosting service and one-stop solutions.

    In 2017, we participated in the Blockchain International Exhibition in Russia, and operated two stores dealing with mining machines in Shenzhen, China, where is one of the biggest miner market in the world. Our products are well recognized by global customers from America, United Kingdom, Canada, Australia, Japan, Russia, and other countries.

    If you want to konw more product information,Pls contact us directly!!!
    Our Advantages:
    1.We provide one-stop solution for your mining. Both miners and mining farm hosting service are available.
    2. We have all kinds of miners in stock, such as Bitmain Antminer, Baikal Miner,Innosilicon Miner, Avalon Miner, WhatsMiner, EBIT Miner, etc.
    3. The quality of products can be guaranteed! We have our own quality inspectors. Every product will be inspected before packing. We have our own maintenance team, who can provide after-sale service.

    Q1: How can I get your latest product and price list?
    A1: Please provide your contact information (Such as Email, Whatsapp, Skype, Trademanager, Wechat) to us. We will contact you and send our quotation to you as soon as possible.
    Q2: How about the Warranty?
    A2: A 45-day warranty for Baikal miners, 180 days warranty for other miners.
    Q3: Who could provide the Warranty Service?
    A3: If it is within the warranty period, the original factory of the miners will be responsible for it. If it is out of warranty, we will provide paid maintenance service.
    Q4: How about the payment?
    A4: We mainly support T/T bank transfer, MoneyGramCredit Card, Western Union, Cash.
    Q5: What is your shipping methods?
    A5: We use UPS, DHL, FedEx, EMS, TNT or the shipping agent as your request.
    Q6: What is the location of your company?
    A6: Our company is located in the Saige Electronic Square,Shenzhen, China. Welcome to visit our company.
    If you want to konw more product information,Pls contact us directly!!!